Install venting unit

• Check contact surface degassing unit (1) for contamination and clean if required.
• Insert venting unit (1) in arrow direction.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Degassing unit on lower housing
  M5x10	Tightening torque	4.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install the battery management ELECTRONICS  (SME) including holder.
• Install the high-voltage battery unit LID .
• Perform EOS TEST