Installing the rear power distribution box

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Position the positive battery cable (3) on the power distribution box (4).
Tighten nut (2).
Close the cover (1).
NOTE: TECHNICAL INFORMATION
Fuses can be pushed out of their correct end positions when connecting the connector.
While connecting the connector, counter support it against the side of the fuses.
After locking the connector, check the fuse assignment for completeness and ensure the correct end position of the individual fuses.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect all connectors and lock.
NOTE: TECHNICAL INFORMATION Caution! Wiring harnesses must be laid and fixed in such a way that no tensile loads act on the wiring harness and its plug connections.
Position the wiring harness (1) so that there is no tensile load on the connector and wiring harness.

Courtesy of BMW OF NORTH AMERICA, INC.
Feed in the new cable strap (1) through the two openings on the power distribution box and tighten it.

Courtesy of BMW OF NORTH AMERICA, INC.
Check all fuses for correct end position and lock correctly.

Courtesy of BMW OF NORTH AMERICA, INC.
Feed in the power distribution box (1) and lock it into place (arrows).
Check the power distribution box (1) is firmly locked.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up Work