Secure the wishbone on the top left and right on the swivel bearing

NOTE: Perform the steps on the right and left side.

Secure the top wishbone on the swivel bearing

Position upper wishbone (3) on the swivel bearing (4).
Replace screws (2) and nuts (1).
Parts: Bolt, nut
Insert screw (2).
The screw (2) must be positioned in the groove of the tappet of the upper wishbone (3).

(F) = driving direction
Tighten nut (1).

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUES SPECIFICATION

Upper wishbone to swivel bearing
M10 Replace screw and nut.	Tightening torque	56 Nm