Remove top wishbone
- Release the nut (1) of the front screw connection above at the upper wishbone on shock tower in the engine compartment.
Support swivel bearing
- Secure special tool 2 358 630 to drive flange with lug bolts.
- Support the swivel bearing using the special tool 2 358 630
and the universal jack.
- Release nut (1).
- Pull out screw (2).
- Release upper wishbone (3) from the swivel bearing (4).
(F) = driving direction
- Undo nut (1) of the ride height sensor on the upper wishbone.
- Loosen screw (3).
- Pull the spring strut outwards slightly until the screws (2) and (3) can be pulled out.
- Pull out screws (2) and (3).
- Remove top wishbone (1).
