Secure the spring strut on the wishbone on the bottom left and right
NOTE:
Perform the steps on the right and left side.
Secure the spring strut to the bottom wishbone
- Position the spring strut on the bottom of the wishbone.
- Replace the bolt (2) and the nut (1).
Parts: Bolt, nut
- Insert the screw (2).
- Tighten nut (1).TIGHTENING TORQUES SPECIFICATION
Lower wishbone to spring strut clevis M14
Replace screw and nut.
Tighten in NORMAL POSITION .Joining torque 165 Nm Angle of rotation 90°
