Installing The Rear Outer Wheel Arch Section

Further information is available.

• Pre-clean bonding surfaces on vehicle and on new part with cleaning agent R2.
  CONSUMABLE - CLEANING AGENT DESCRIPTION
  
  

  Cleaning agent R2

  500 ml

  83190417324

• Clean bonding surfaces on vehicle and on new part with cleaning agent R1.
  CONSUMABLE - CLEANING AGENT DESCRIPTION
  
  

  Cleaning agent R1

  100 ml, Bottle

  83192211217

• Apply adhesive K5 to the bonding surfaces.
  ADHESIVE DESCRIPTION
  
  

  Body adhesive K5

  50 ml

  83192158654

• Install the new part in area (1), rivet with blind rivet N3.
  CONSUMABLE - BLIND RIVET DESCRIPTION
  
  

  Blind rivet N3  Ø 4 mm; clamping area 1-3 mm

  83190301421

  Courtesy of BMW OF NORTH AMERICA, INC.

• In area (1), rivet the new part with blind rivet N3.

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: TECHNICAL INFORMATION 
  For additional information see: 41 00... Installation of a cavity sealing (not expanding)
• Apply sealant to the new cavity sealing. Install cavity sealing (1).
  CONSUMABLE - SEALANT DESCRIPTION
  
  

  Sealant D2

  290 ml

  83425A547B9

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to ACTIVATE HIGH-VOLTAGE SYSTEM .
• Refer to INSTALL FLAP IN RIGHT LUGGAGE COMPARTMENT TRIM PANEL .