Remove Bonnet
WARNING:
Working on 12 V vehicle electrical system.
Risk of short circuits! Risk of fire!
Risk of short circuits! Risk of fire!
- Make sure that no charger is connected to the jump start support point in the engine compartment.
- Detach battery earth lead from battery.
- With auxiliary batteries: Detach all battery earth leads from additional batteries.
Preliminary work
- Refer to DISCONNECTING ALL BATTERY EARTH LEADS .
- Refer to REMOVING THE NOZZLE CHAIN .
NOTE:
RISK OF DAMAGE
Mechanical effects.
Paint damage.
Mechanical effects.
Paint damage.
- Mask those working areas at risk with yellow plastic adhesive tape.
- Remove and install heavy or bulky components with the aid of another person/other persons.
NOTE:
Perform the operations on the left and right side.
- Remove protective cap (1).
- Slacken nut (2).
- Support the bonnet.
- Loosen nut (3).
- Remove bonnet.