Install Wheel Arch

Further information is available.

Pre-clean bonding surfaces on vehicle and on new part with cleaning agent R2.
CONSUMABLE - CLEANING AGENT DESCRIPTION

Cleaning agent R2 500 ml 83190417324
Clean bonding surfaces on vehicle and on new part with cleaning agent R1.
CONSUMABLE - CLEANING AGENT DESCRIPTION

Cleaning agent R1 100 ml, Bottle 83192211217
Apply adhesive K1 to the bonding surfaces.
ADHESIVE DESCRIPTION

Body adhesive K1 195 ml 83190413015
Install the new parts with an alignment bracket or a universal mount.

Rivet new parts in the areas (1) and (2) with blind rivets N2.

CONSUMABLE - BLIND RIVET DESCRIPTION

Blind rivet N2	83190301419
ø 6.5 mm; clamping area 4.8-6.8 mm

Courtesy of BMW OF NORTH AMERICA, INC.

Rivet the new parts in the areas (1) with blind rivets N1.

CONSUMABLE - BLIND RIVET DESCRIPTION

Blind rivet N1	83190301414
ø 6.5 mm; clamping area 2.8-4.8 mm

Courtesy of BMW OF NORTH AMERICA, INC.

Apply sealant D1 to the new cavity sealing (1).
CONSUMABLE - SEALANT DESCRIPTION

Sealant D1 (seam sealing) 310 ml 83422409985
Insert the cavity sealing (1) into the carrier support for the new part.
Apply sealant D1 to cavity sealing (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Install the carrier support for the new part.

Rivet the new parts in the areas (1) and (2) with blind rivets N1.

CONSUMABLE - BLIND RIVET DESCRIPTION

Blind rivet N1	83190301414
ø 6.5 mm; clamping area 2.8-4.8 mm

Rivet the new parts in the areas (3) with blind rivets N3.

Consumable

Courtesy of BMW OF NORTH AMERICA, INC.

Blind rivet N3	83190301421
ø 4 mm; clamping area 1-3 mm

In the area (4), use a bind rivet N6.

CONSUMABLE - BLIND RIVET DESCRIPTION

Blind rivet N6	83192158655
ø 4 mm; clamping area 3-5 mm

Weld the new parts in areas (1) according to the new part preparation process.
Avoid excessive application of heat to adhesive areas

Courtesy of BMW OF NORTH AMERICA, INC.
Weld the new part in areas (1) according to the new part preparation process.
Avoid excessive application of heat to adhesive areas

Courtesy of BMW OF NORTH AMERICA, INC.

Rivet new parts in the areas (1) and (2) with blind rivets N1.

CONSUMABLE - BLIND RIVET DESCRIPTION

Blind rivet N1	83190301414
ø 6.5 mm; clamping area 2.8-4.8 mm

Courtesy of BMW OF NORTH AMERICA, INC.

Rivet new parts in the areas (1) with blind rivets N1.

CONSUMABLE - BLIND RIVET DESCRIPTION

Blind rivet N1	83190301414
ø 6.5 mm; clamping area 2.8-4.8 mm

Courtesy of BMW OF NORTH AMERICA, INC.

Install EMC screw

Drill a 4.2 mm diameter hole after the adhesive has fully cured.
Screw in the EMC screw.
Seal the EMC screw with sealing compound.
CONSUMABLE - SEALANT DESCRIPTION

Sealant D1 (seam sealing) 310 ml 83422409985

After the adhesive has hardened, install 3 EMC screws in the areas (1) shown.

CONSUMABLE - SCREW DESCRIPTION

screw	83190301639
EMC screw, SF Plus, M5x15

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work