Install the actuator on the left bonnet hinge
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Insert the actuator (1) into the guide pin (2) and push towards the rear up to the limit position in direction of arrow.
- Replace the screw (3).
Parts: Screw
- Tighten down screw (3).
TIGHTENING TORQUES SPECIFICATION
| Actuator to engine compartment lid hinge | ||
| M6x12 Replace screw. |
Tightening torque | 8 Nm |
- Connect connectors (4) and lock.
Follow-up Work
- Install cowl panel COVER .
- Install left and right WIPER ARM .
- Install the rear left engine compartment COVER .
- Connect all battery EARTH LEADS .
- Activate the 48 v ELECTRICAL SYSTEM .