Install the cup holder

Insert the springs (1) on the left and right in the front section (2).
Make sure the springs (1) are positioned correctly.

Courtesy of BMW OF NORTH AMERICA, INC.
Clip in the front section (1) in the frame (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the guides (1) of the frame (2) in the associated mountings (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Clip in the frame (1) in the marked area completely in the center armrest.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the rubber mat (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the right hinge (1) with the associated spring.
Insert the left hinge (1) without spring.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the lid (1) folded back (A) in the hinge (B).

Courtesy of BMW OF NORTH AMERICA, INC.
Open the lid (1) and check for correct fit at the hinges (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Fold the spring (1) forward and guide in the insert (2) from the top.
Ensure that the spring (1) is threaded under the insert (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Clip the insert (1) completely into the lid (2).
Make sure the latch mechanism and gap in the area (3) are correct.

Courtesy of BMW OF NORTH AMERICA, INC.