Installing front wheel arch trim
NOTE:
TECHNICAL INFORMATION
For reasons of optimal adhesion, painting of bonding surfaces on the inside of the wheel arch trim is prohibited!
The adhesive pad (double-sided adhesive tape) must be applied to the wheel arch trim prior to painting the wheel arch trim.
For reasons of optimal adhesion, painting of bonding surfaces on the inside of the wheel arch trim is prohibited!
The adhesive pad (double-sided adhesive tape) must be applied to the wheel arch trim prior to painting the wheel arch trim.
- Remove the adhesive residue from the bonding surface.
- Clean the bonding surface with solvent cleaner R2.
EXPENDABLE MATERIALS - CLEANING AGENT DESCRIPTION
| Cleaning agent R2 | 500 ml | 83190417324 |
- Adhere to the air drying time of 2 minutes.
- Pull the protective film off the adhesive pad (double sided adhesive tape).
- Position wheel arch trim (1) on side panel using the positioning aid (arrow) and press down tightly.
