Installing the door stop
- Feed the door brake (3) into the door.
- Tighten nuts (2).
TIGHTENING TORQUES SPECIFICATION
| Door retainer to door | ||
| Nut M6 | Tightening torque | 8 Nm |
- Tighten down screw (1).
TIGHTENING TORQUES SPECIFICATION
| Door stop to pillar | ||
| Screw | Tightening torque | 28 Nm |
Follow-up Work
- Install the front door MODULE CARRIER .
- Install front door TRIM PANEL .
- Attach the door handle COVER .
- Install the front door WEATHER STRIP .
- Fit exterior MIRROR .
- Install the mirror triangle COVER .
- ACTIVATE the 48 v electrical system.