Installing the controller drive for the high-voltage charging socket

• Position the controller drive (2) for the high-voltage charging socket.
• Tighten the screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Controller drive to high-voltage charging socket
  Tightening torque
  Screw	1.0 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the lever (1) including the retaining strap on the controller drive (3) for the high-voltage charging socket and connect it.
• Connect connectors (2) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position high-voltage charging socket (4).
• Tighten down screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Holder for high-voltage charging socket
  Tightening torque
  Nut M6	6 Nm

• Connect connectors (2) and lock.
• Connect connectors (3) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install the high-voltage charging socket COVER HOUSING .
• Reconnect all BATTERY GROUND LEADS .
• Activate HIGH-VOLTAGE SYSTEM .