Installing the electrical vacuum pump

• Attach vent hose (1) in arrow direction.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position electrical vacuum pump with holder (2).
• Replace screws (1).

  Parts:  screws.

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUES SPECIFICATION
  
  

  Electrical vacuum pump holder to body
  M6 Replace screws.	Tightening torque	8 Nm

• Insert screws (1) and tighten them.
• Attach the vacuum line in the holders (3).
• Position snap fastener (2) and lock.
• Connect connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install the right front side UNDERSHLELD .
• Mount the WHEEL .