Prepare New Part

• Coat the side panel (1)  before painting in this area (2)  using sealant D1.
• Paint side panel.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unclip holder (1)  from the damaged side panel. (Arrow)

  Courtesy of BMW OF NORTH AMERICA, INC.

Check 

• Check the holder for damage. (Arrow)
• Check the lock (1)  and guide for the headlight (2)  for damage.

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» Holder (1)  damaged.

Measure

• Replace the holder (1)  .
• Position and clip in the holder (1)  on the new side panel. (Arrow).
• Make sure that the detents engage correctly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the detents (1)  and remove the seal (2)  from the damaged side panel.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the seal (2)  on the new side panel.
• Clip in seal only on the bottom detent (3)  .
• Make sure that the detents (1)  do not clip in.

  Courtesy of BMW OF NORTH AMERICA, INC.