Install The Luggage Compartment Floor On The Right

Further information is available. 

• Pre-clean bonding surfaces on vehicle and on new part with cleaning agent R2.
  CONSUMABLE - CLEANING AGENT DESCRIPTION (R2)
  
  

  Cleaning agent R2

  500 ml

  83190417324

• Clean bonding surfaces on vehicle and on new part with cleaning agent R1.
  CONSUMABLE - CLEANING AGENT DESCRIPTION (R1)
  
  

  Cleaning agent R1

  100 ml, Bottle

  83192211217

• Apply adhesive K5 to the bonding surfaces.
  ADHESIVE DESCRIPTION
  
  

  Body adhesive K5

  50 ml

  83192158654

• Install the new part and rivet it in the area (3) with blind rivets N1.

  Courtesy of BMW OF NORTH AMERICA, INC.

  CONSUMABLE - BLIND RIVET DESCRIPTION (N1)
  
  

  Blind rivet N1	83190301414
  ø 6.5 mm; clamping area 2.8-4.8 mm

• In the area (2), use a bind rivet N2.
  CONSUMABLE - BLIND RIVET DESCRIPTION (N2)
  
  

  Blind rivet N2	83190301419
  ø 6.5 mm; clamping area 4.8-6.8 mm

• Weld the new part in the area (1).
  NOTE: To provide a better overview: Shown without side panel.
• Rivet the new part in area (3) with blind rivets N2.
  CONSUMABLE - BLIND RIVET DESCRIPTION (N2)
  
  

  Blind rivet N2	83190301419
  ø 6.5 mm; clamping area 4.8-6.8 mm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Weld the new part in the areas (1) and (2). Avoid applying too much heat to the adjacent adhesive area (3).
• Weld the new part in the area (1).

  Courtesy of BMW OF NORTH AMERICA, INC.