Remove lower wishbone
NOTE:
TECHNICAL INFORMATION
Perform wheel alignment after installation.
Perform wheel alignment after installation.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING THE FRONT LEFT WHEEL .
- Refer to REMOVING THE COVER OF THE STEERING ASSEMBLY .
- Unfasten nut (1).
- Remove the screw (2).
- Unfasten nut (1).
- Remove the screw (2).
- Unfasten nut (1).
- Loosen wishbone (2) from the swivel bearing with the wheel guide joint upwards in direction of arrow.
- Unfasten nut (1).NOTE: Counter support on the Torx socket of the wheel guide joint (2).
- Remove the wheel guide joint (2) from the wishbone.



