For reusing: Checking the output shaft and replacing the snap rings

NOTE: TECHNICAL INFORMATION 
It is essential to replace the snap rings of the output shaft.

NOTE: TECHNICAL INFORMATION 
Extreme force being required during installation is an indication that the component is damaged or deformed. Check component and replace if necessary.

• Check the gearing of the output shaft for damage and replace damaged parts if necessary.
• Check the dust plate (1) for damage and replace damaged parts as needed.
• Replace the snap rings (3).

  Parts:  snap rings

• Coat the contact surface (2) using APPROVED FINAL DRIVE transmission differential fluid.

Courtesy of BMW OF NORTH AMERICA, INC.