Removing the camber control arm

WARNING: Vehicle may slip off the vehicle hoist if the vehicle hoist is handled incorrectly.
Danger! Life-threatening injuries!

Observe safety information on raising the vehicle using a vehicle hoist.
For additional information see: 00... Raise the vehicle using a VEHICLE LIFT .

Preliminary work

Remove the WHEEL .
Remove the camber control arm COVER .

NOTE: TECHNICAL INFORMATION
Perform ALIGNMENT CHECK after installation.

Loosen nut (3) .
(2) Pull out screw.
Loosen nut (5) .
(4) Pull out screw.
Loosen the nut (6) and remove the eccentric washer.
(7) Pull out screw.
Remove the camber arm (1) .

Courtesy of BMW OF NORTH AMERICA, INC.