Install compression strut

• Replace screws (1) and (2).

  Parts:  Bolts

• Position compression strut (3).
• Tighten down screws (1) and (2) by hand.
• Tighten down screw (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Rear axle carrier to body
  M14 Replace screw.	Tightening torque	185 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Compression strut on body
  M10 Replace screws.	Jointing torque	56 Nm
  	Angle of rotation	45°

Follow-up Work 

• Install tank COVER .