Secure the spring strut on the wishbone on the bottom left and right
NOTE:
Perform the steps on the right and left side.
Secure the spring strut to the bottom wishbone
- Position the spring strut on the bottom of the wishbone.
- Replace the bolt (2)
and the nut (1)
.
Parts: Bolt, nut
- Insert the screw (2) .
- Tighten nut (1) .
TIGHTENING TORQUES SPECIFICATION
| Lower wishbone to spring strut clevis | |
|---|---|
| M14 Replace screw and nut. Tighten in NORMAL POSITION . |
Joining torque 165 Nm Angle of rotation 90° |
