Secure the wishbone on the top left and right on the swivel bearing

Secure the top wishbone on the swivel bearing 

• Position upper wishbone (3)  on the swivel bearing (4)  .
• Replace screws (2)  and nuts (1)  .

  Parts:  Bolt, nut

• Insert screw (2)  .

  The screw (2)  must be positioned in the groove of the tappet of the upper wishbone (3)  .

  (F)  = driving direction

• Tighten nut (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUES SPECIFICATION
  
  

  Upper wishbone to swivel bearing
  M10 Replace screw and nut.	Tightening torque  56 Nm