Fastening the spring strut holder on the left and right to the wishbone below

NOTE: Perform the steps on the right and left side.

Fasten the spring strut holder on the bottom wishbone

NOTE: TECHNICAL INFORMATION
Keep the connection of the spring strut holder to the spring strut clean and free from oil and grease.

NOTE: Tighten the screw connection in the NORMAL POSITION .

Position spring strut holder on wishbone.
Replace screw (2) and the nut (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Parts: Bolt and nut
Install the screw (2).
Tighten the nut (1) in NORMAL POSITION .

TIGHTENING TORQUES SPECIFICATION

Bottom wishbone on spring strut holder
M14 Replace screw and nut. Tighten screw connection in normal position!	Joining torque	165 Nm
	Angle of rotation	90°