Remove trailing link
Preliminary work
- Refer to REMOVING THE WHEEL .
- Refer to IF INSTALLED: REMOVING THE HUB CAP .
- Refer to LOOSENING THE OUTPUT SHAFT FROM THE WHEEL BEARING .
- Refer to REMOVING THE FRONT LOWER WHEEL ARCH COVER .
NOTE:
RISK OF DAMAGE
Component damage caused by striking tools.
Brute force can result in component damage.
Component damage caused by striking tools.
Brute force can result in component damage.
- Only use those tools intended for the work.
- Loosen nut (1).
- Loosen the tension strut from the swivel bearing.
Removing the brake ventilation duct
- Loosen the screw (1) and guide the brake ventilation duct (2) out of the wheel arch cover.
- Release screws (1) from front wheel arch trim panel (2).
- Fold the wheel arch trim panel (2) towards the top.
- Loosen screw (1).
- Remove the screw (1) with the crash element (2).
- Remove tension strut (1).
