Installing starter motor

Insert and install the starter motor (2).
Tighten down screws (1).

TIGHTENING TORQUES SPECIFICATION

Starter motor to engine
M8X60	tightening torque	19 Nm

G14192397

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUES SPECIFICATION

Starter motor to crankcase
M8x60	Tightening torque	19 Nm

Follow-up work

Refer to INSTALLING THE REAR THRUST FIELD .
Refer to INSTALLING THE UNDERBODY PROTECTION OF THE STEERING GEAR OR THE FRONT THRUST FIELD .
Refer to CONNECTING NEGATIVE BATTERY CABLE .