Installing the low power distribution box

• Connect connector (3).
• Push the lock (2) downward.
• Clip in cable with holder (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the power distribution box (2).
• Tighten plastic nuts (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Power distribution box
  Plastic nut with flange	Tightening torque	2.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten all nuts (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Positive battery cable
  Positive pole screw	Tightening torque	15 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in the cover (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the positive battery cable using the nut (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Positive battery cable
  Positive pole screw	Tightening torque	15 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the positive battery cables using the screws (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Positive battery cable
  M8x16 screw	Tightening torque	15 Nm

• Connect all connectors (3).
• Clip in the cover (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up Work 

• Install the right luggage compartment wheel arch TRIM PANEL .
• Install rear seat and rear SEAT BACKREST (not in case of SA465 through-loading system)
• Install right backrest SIDE SECTION .
• Install loading EDGE TRIM .
• Reconnect all battery EARTH LEADS
• Activate the 48 v ELECTRICAL SYSTEM .