Removing the lid of the high-voltage battery unit
WARNING:
High-voltage system.
The high-voltage system operates on the basis of hazardous, electrical voltage and high currents. Mortal hazard through electric shock!
The high-voltage system operates on the basis of hazardous, electrical voltage and high currents. Mortal hazard through electric shock!
- All work on the high-voltage system may only be carried out by specially trained and technically experienced personnel.
- For additional information see: 61 00... SAFETY INSTRUCTIONS on handling hybrid cars
- For additional Information see: 61 25... Notes on REPAIR of high-voltage battery unit
- Release the screws (1) and lift off the lid.
- Remove the seal (1).
- Disconnect high-voltage cable (1).
NOTE:
TECHNICAL INFORMATION
Remove any contamination and moisture from the lid of the high-voltage battery unit to avoid contaminating it.
Carry out a visual inspection for damage and moisture ingress on the opened high-voltage battery unit. If damage is detected, work must be stopped immediately and a qualified electrician or technical support must be contacted.
Remove any contamination and moisture from the lid of the high-voltage battery unit to avoid contaminating it.
Carry out a visual inspection for damage and moisture ingress on the opened high-voltage battery unit. If damage is detected, work must be stopped immediately and a qualified electrician or technical support must be contacted.