Installing the battery management electronics (SME) including holder
- Insert the battery management electronics (SME) (2) into the housing.
- Connect plug (1).
- Tighten down screws (1).TIGHTENING TORQUES SPECIFICATION
Battery management electronics holder to lower housing section M6x16 replace screw. Tightening torque 13 Nm TIGHTENING TORQUES SPECIFICATIONWiring harness cable head communication to SME holder Nut M5 Tightening torque 4.5 Nm - Clip in the wiring harness (2) at the holder.
