Install fan cowl

• Feed in and install the fan cowl (3) in the direction of the arrow.
• Tighten the screws (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Fan cowl on radiator
  TS6x20	Tightening torque	6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock the connector (1).

  The connector (1) must engage audibly.

• If fitted: 

  Fasten the coolant line (1) below at the fan cowl with the clamps.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in and install coolant line (2).
• Lock clamps (1).

  The clamps (1) must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALL THE REAR TOP CROSS CONNECTION .
• Refer to INSTALL FRONT CROSS CONNECTION .
• Refer to INSTALLING FRONT-END STRUT ON LEFT AND RIGHT .
• Refer to INSTALLING THE COVER ON THE LEFT AND RIGHT IN THE ENGINE COMPARTMENT AT THE TOP
• Refer to INSTALL RESONATOR .