Installing the coolant line from the coolant radiator to the connecting bracket of engine block

• Check the sealing ring (1) of the coolant line (2) for damage and replace if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Guide in the coolant line (1) and install it.
• Connect and lock the coolant line (1) in the marked area (2).

  The coolant line (1) must engage audibly.

• Fasten the coolant line (1) in the holder (3).
• Lock holder (3).

  The holder (3) must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
• Connect and lock the coolant line (2).

  The coolant line (2) must engage audibly.

• Connect and lock coolant line (1).

  The coolant line (1) must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALL CONTROL UNIT BRACKET .
• Refer to INSTALL THE INTEGRATED POWER SUPPLY MODULE (PDM) .
• Refer to INSTALLING THE DME CONTROL UNIT .
• Refer to INSTALL ACOUSTIC COVER .
• Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
• Refer to CONNECTING THE COOLANT LINES .
• Refer to FILL AND VENT THE HIGH-TEMPERATURE COOLANT CIRCUIT .