Installing the return line for the transmission oil cooler

Prerequisite 

The feed line for the transmission oil cooler is removed.

• Replace the sealing ring (1) of the return line (2).

  Parts  : Sealing ring

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect the return line (2) to the transmission oil cooler.
• Press the lock (1) in arrow direction and lock it.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect the return line (1) from the transmission oil cooler to the automatic transmission (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE FEED LINE FOR THE TRANSMISSION OIL COOLER .
• Refer to SECURE THE JUNCTURE SHAFT IN FRONT ON THE FRONT AXLE DIFFERENTIAL .
• Refer to CHECKING/TOPPING UP THE OIL LEVEL IN THE AUTOMATIC TRANSMISSION .
• Refer to INSTALL REAR UNDERBODY PROTECTION .
• Refer to INSTALL THE THRUST FIELD .
• Refer to INSTALLING THE UNDERBODY PROTECTION OF THE STEERING GEAR OR THE FRONT THRUST FIELD .
• Refer to INSTALL THE FRONT UNDERBODY PROTECTION OR FRONT THRUST FIELD .