Installing the left-hand charge air cooler

• Feed in charge air cooler (1) to the guide (2) and into the throttle body.
• Lock the lock (3) audibly.
• Tighten down screw (4).

Courtesy of BMW OF NORTH AMERICA, INC.

• Connect coolant line (1) to the charge air cooler and lock it audibly.
• Connect coolant line (2) to the charge air cooler and lock it audibly.
• Attach coolant line (3) to the charge air cooler.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Attach plug connection (1) to the charge air cooler.
• Attach tank vent valve (2) to the charge air cooler.
• Connect connector (3) to the pressure sensor on the charge air cooler and lock audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE LEFT UNFILTERED-AIR DUCT .
• Refer to CONNECTING THE LEFT CHARGE AIR LINE TO THE EXHAUST TURBOCHARGER
• Refer to INSTALLING INTAKE FILTER HOUSING .
• Refer to INSTALL ACOUSTIC COVER .
• Refer to CONNECTING THE COOLANT HOSE TO THE AUXILIARY COOLANT PUMP .
• Refer to INSTALLING FAN COWL .
• Refer to INSTALL THE FRONT UNDERBODY PROTECTION OR FRONT THRUST FIELD .
• Refer to INSTALLING THE UNDERBODY PROTECTION OF THE STEERING GEAR OR THE FRONT THRUST FIELD .
• Refer to INSTALL THE REAR TOP CROSS CONNECTION .
• Refer to INSTALL FRONT CROSS CONNECTION .
• Refer to INSTALLING FRONT-END STRUT ON LEFT AND RIGHT .
• Refer to INSTALLING THE COVER ON THE LEFT AND RIGHT IN THE ENGINE COMPARTMENT AT THE TOP
• Refer to FILL THE LOW-TEMPERATURE COOLING SYSTEM WITH THE VACUUM FILLING EQUIPMENT .
• Refer to VENTING THE LOW-TEMPERATURE COOLING SYSTEM .