Install the electrical auxiliary coolant pump for the charge air cooler or the air conditioning condenser
- Connect the connector (1) on the auxiliary coolant pump (2) and lock.
- Make sure the connector (1) engages audibly.
- Position the auxiliary coolant pump (3) on the holder and fasten with the rubber band (2).NOTE: Make sure that the connections are locked correctly. The locks must engage audibly.
- Connect and lock coolant line (1).
- Make sure that the cooling line (1) engages audibly.
Follow-up work
- Refer to CONNECTING THE COOLANT LINES FOR THE LOW-TEMPERATURE COOLANT CIRCUIT .
- Refer to FILLING THE LOW-TEMPERATURE COOLING SYSTEM WITH THE VACUUM FILLING EQUIPMENT
- Refer to INSTALLING FAN COWL .
- Refer to INSTALLING THE REAR TOP CROSS CONNECTION .
- Refer to INSTALLING FRONT CROSS CONNECTION .
- Refer to INSTALLING FRONT-END STRUT ON LEFT AND RIGHT .
- Refer to INSTALLING THE COVER ON THE LEFT AND RIGHT IN THE ENGINE COMPARTMENT AT THE TOP
- Refer to INSTALLING FRONT STIFFENING PLATE .
- Refer to INSTALLING THE FRONT UNDERBODY PROTECTION OR FRONT THRUST FIELD .
- Refer to VENTING THE LOW-TEMPERATURE COOLING SYSTEM .