Replacing the oil return line
- Loosen screws (2).
- Remove oil return line (1).
- Ensure that the sealing surfaces in the area of the oil return line are planar and free from oil and grease.
- Replace oil return line (3) after each disassembly of the exhaust turbocharger.
Parts : Oil return line
- Replace gasket (1).
Parts : Gasket
- Replace screws (2).
Parts : screw
- Position screws (2) in oil return line (3).
- Push seal (1) onto screws (2).
- Position the oil return line (1).
- Tighten screws (2) with an electronic torque wrench with tightening angle display.
To ensure correct screw tightening, a second person is required!
TIGHTENING TORQUES SPECIFICATION
| Oil return line at the exhaust turbocharger | ||
|---|---|---|
| M6x16 Replace screws. |
Joining torque | 5 Nm |
| Angle of rotation | 60° | |
- Loosen screws (2).
- Remove oil return line (1).
- Ensure that the sealing surfaces in the area of the oil return line are planar and free from oil and grease.
- Replace oil return line (3) after each disassembly of the exhaust turbocharger.
Parts : Oil return line
- Replace gasket (1).
Parts : Gasket
- Replace screws (2).
Parts : screw
- Position screws (2) in oil return line (3).
- Push seal (1) onto screws (2).
- Position the oil return line (1).
- Tighten screws (2) with an electronic torque wrench with tightening angle display.
To ensure correct screw tightening, a second person is required!
TIGHTENING TORQUES SPECIFICATION
| Oil return line at the exhaust turbocharger | ||
|---|---|---|
| M6x16 Replace screws. |
Joining torque | 5 Nm |
| Angle of rotation | 60° | |