Replacing the rear silencer

Detach retaining bracket (1).
Release the screws (2).
Remove controller drive for exhaust flap of the previous rear silencer.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
Exhaust covers must be replaceed after removal.
The correct stop on the exhaust system can not be guaranteed after removal.
Replace the exhaust cover (1).
Parts: Exhaust cover
Install exhaust cover (1) in arrow direction.

Screw on actuator for exhaust flap using screws (2) and tighten.

G14193031

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUES SPECIFICATION

Controller drive exhaust flap to exhaust system
M6x16	Tightening torque	8.5 Nm

Hook retaining bracket (1).

G14193030

Courtesy of BMW OF NORTH AMERICA, INC.