Installing the rear silencer
- Guide in and install rear silencer (3) with the help of a support person.
- Replace nuts (2).
Parts: Nuts
- Tighten nuts (2).TIGHTENING TORQUES SPECIFICATION
Rear silencer to body/bumper support M8
Replace nuts.Tightening torque 19 Nm - Connect connectors (1) and lock.
The connector (1) must engage audibly.
- Connect the rear silencer (1) with a clamp (2) to the front pipe (3).
- Center and tighten gripper clamp (2).TIGHTENING TORQUES SPECIFICATION
Clamp with partial replacement of exhaust system Clamp Tightening torque 45 Nm

