Replace the right molded hose

Courtesy of BMW OF NORTH AMERICA, INC.

• Use a knife to cut open the preformed hose in the area (1).
• Replace the pressure pipe with union nut (2).

  Parts:  Pressure pipe, union nut

• Replace molded hose.

  Parts:  Molded hose

  Only low-surface-tension water is permitted for the installation.

• Make sure that the molded hose (1) is routed in the area (2) as shown.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALL REAR UNDERBODY PROTECTION .