Removing delivery unit
Prerequisite
- Vehicle without stationary heating
WARNING:
Working on fuel system.
Risk of fire! Danger of explosion!
Risk of fire! Danger of explosion!
- When working on the fuel system, make sure the workstation has sufficient ventilation, e.g., by means of extraction.
- Tightly seal off open lines and connections; collect any leakage fuel directly at the point of exit.
- No fire, sparks, open flames or smoking.
NOTE:
TECHNICAL INFORMATION
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
Preliminary work
- Refer to SUCTION THE FUEL TANK .
- Refer to REMOVE REAR SEAT BENCH .
- Refer to OPENING THE LOCKING RING
- Remove the flange lid (1) in the arrow direction.
- Detach the cable from the holder (2).
- Disconnect plug connection (1).
- Unlock and detach snap fastener (1).
- Unlock lock (1) arrow direction from the top.
- Slightly press the delivery unit (2) in arrow direction and feed out to the top.
