Replacing oil sump: remount the oil-level sensor

Additional information is available.

NOTE: RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.

Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.
Read and comply with user information on using the associated special tool 12 7 060.
Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
For additional information see: NOTES ON ESD (ELECTROSTATIC DISCHARGE) PROTECTION

Guide the seal plug (1) out of the oil sump (2) in the direction of arrow and remove.

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen nuts (1).
Feed out and remove the oil-level sensor (2),

Courtesy of BMW OF NORTH AMERICA, INC.
Replace O-ring (1).
Parts: O-ring

Courtesy of BMW OF NORTH AMERICA, INC.
Insert and install the oil-level sensor (2).
Tighten nuts (1).

TIGHTENING TORQUES SPECIFICATION

Courtesy of BMW OF NORTH AMERICA, INC.

Guide the seal plug (1) into the oil sump (2) in the direction of arrow and install.

Courtesy of BMW OF NORTH AMERICA, INC.