Replacement: Preparing the intake camshaft
- Affix the intake camshaft with a standard open-end wrench (1) .
- Loosen screw (2).
- Remove the camshaft sensor wheel (3)
.
- Insert and install the camshaft sensor wheel (3) .
- Ensure that the camshaft sensor wheel (3) is correctly positioned on the guide pin (4) .
- Affix the intake camshaft with an open-end wrench (1) .
- Tighten down screw (2) .
TIGHTENING TORQUES SPECIFICATION
| Camshaft sensor wheel to intake camshaft | ||
|---|---|---|
| M6x16 Replace screw. |
1. Tightening torque | 5 Nm |
| 2. Angle of rotation | 90° | |