Block the belt tensioner with the special tool
Preliminary work
- Refer to REMOVING THE COVER ON LEFT AND RIGHT IN THE ENGINE COMPARTMENT AT THE TOP .
- Refer to REMOVING THE LEFT AND RIGHT FRONT-END STRUT .
- Refer to REMOVING FRONT CROSS CONNECTION .
- Refer to REMOVING THE REAR TOP CROSS CONNECTION .
- Refer to REMOVING FAN COWL .
- Refer to REMOVING BOTH FRONT-END STRUTS .
- Refer to REMOVING FAN COWL .
- Refer to RELEASING THE COOLANT EXPANSION TANK FROM THE HOLDERS .
CAUTION:
Spring preload.
Injury hazard!
Injury hazard!
- The use of the specified special tool (tool) is mandatory.
- Carry out the described steps properly.
- Twist belt tensioner (1) in arrow direction.
- Remove special tool 0 496 268 (11 0 390) .
