Removing the exhaust turbocharger (cylinder head removed)

CAUTION: Heavy component.
Heavy components can lead to injury or damage.

Remove and install heavy components with the aid of another person/other persons.

NOTE: RISK OF DAMAGE
Damage of the electric wastegate valve controller.
Excessive force when removing and installing a jammed exhaust turbocharger may damage the electric wastegate valve controller.

Do not pull on the electric wastegate valve controller.
Apply force only at the turbine housing and exhaust manifold.
Do not pull on the compressor housing.

Loosen screws (1).
Feed out and remove the heat shield (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen nuts (1).
Loosen screws (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Guide out and remove the exhaust turbocharger (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Guide out and remove the seals (1) on the cylinder head.

Courtesy of BMW OF NORTH AMERICA, INC.