Replacing the cylinder head (remounting components)

Release the venting connector (1) at the cylinder head (3).
Release the coolant temperature sensor (2) at the cylinder head (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Replace the cylinder head (3).
Parts: Cylinder head

Tighten venting connector (1) on cylinder head (3).

TIGHTENING TORQUES SPECIFICATION

Venting connector/special tool to cylinder head
M10	Tightening torque	18 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the coolant temperature sensor (2) on the cylinder head (3).

TIGHTENING TORQUES SPECIFICATION

Coolant temperature sensor at cylinder head
Sensor	Tightening torque	18 Nm