Replacement: Remount mounted parts
NOTE:
RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.
Electrostatic discharge.
Damage to or destruction of electrical components.
- Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information, see NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Release the oil filler cap (1).
- Loosen screw (2).
- Feed out and remove the intake camshaft sensor (3).
- Loosen screw (4).
- Feed out and remove the exhaust camshaft sensor (5).
Prepare the camshaft position sensor
- Check sealing ring (1) for damage, replace if necessary.
- Insert and install the exhaust camshaft sensor (5).
- Tighten down screw (4).TIGHTENING TORQUES SPECIFICATION
Exhaust camshaft sensor to cylinder head cover TS5x20 Tightening torque: 4 Nm - Insert and install the intake camshaft sensor (3).
- Tighten down screw (2).TIGHTENING TORQUES SPECIFICATION
Intake camshaft sensor to cylinder head cover TS5x20 Tightening torque: 4 Nm - Close oil filler cap (1).
