Lowering the engine and detaching the engine bridge

• Turn the special tool (spindle) 2 361 506 (00 6 103)  to lower the engine until it is positioned completely flat on the engine mounts.
• Remove the engine bridge with the help from another person.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten screws (1) on the left and right.
  TIGHTENING TORQUES SPECIFICATION
  
  

  Top rear connection to body
  Torx screw M8x30	tightening torque	19 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

  Installing the lateral hood seals 

  NOTE: Perform the steps on the right and left side.
• Position the lateral hood seal (2) at the shock tower.
• Secure the rivet (1).

Courtesy of BMW OF NORTH AMERICA, INC.