Removing the intake pipe

Preliminary work 

• Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
• Refer to REMOVING THE ACOUSTIC COVER .
• Refer to REMOVING THE COVER OF THE RIGHT DME CONTROL UNIT .
• Refer to REMOVING THE CONTROL UNIT BRACKET FOR CYLINDERS 1 TO 4 .

• Remove retaining clip (1).
• Unclip the intake pipe (2) from the holder in the area (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Guide out and remove the cover (3).
• Loosen screws (1).
• Press the wiring harness (2) to the side.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove retaining clip (1).
• Feed out and remove the intake pipe (2).

  Courtesy of BMW OF NORTH AMERICA, INC.