Installing the special tool
NOTE:
TECHNICAL INFORMATION
Make sure the vehicle is operating temperature for engine oil service (engine oil temperature > 70°C).
Make sure the vehicle is operating temperature for engine oil service (engine oil temperature > 70°C).
- Install special tool 2 209 377 (11 7 470) including filter element.
TIGHTENING TORQUES SPECIFICATION
| Oil filter cover to oil sump upper part | ||
|---|---|---|
| S88, 5x3 | 1. Initial tightening | 30 Nm |
| 2. Slacken | 180° | |
| 3. tightening torque | 40 Nm | |
- Secure special tool 0 496 820 (11 7 430) .
TIGHTENING TORQUES SPECIFICATION
| Special tool 117430 | ||
|---|---|---|
| M12 Check O-ring. |
Tightening torque | 10 Nm |
- Secure special tool 0 496 623 (11 4 310) to special tool 0 496 820 (11 7 430) .
TIGHTENING TORQUES SPECIFICATION
| Special tool 114310 | ||
|---|---|---|
| Coupling nut | Tightening torque | 15 Nm |
- Screw in the 100 bar sensor hand-tight.
- Start diagnosis.
Follow-up work
- Refer to REMOVING SPECIAL TOOL .
- Refer to TIGHTENING THE OIL FILTER CAP .