Starter, Removing And Installing, Vehicles With 4-Cylinder Engine: Installing

Fig 1: Identifying Seal -1- And Opening For Starter -2- -Arrow-

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal and Note The Following :

-- If the vehicle has an automatic transmission, make sure the sealing piece -1- fits correctly inside the starter opening before installing the starter.

The sealing piece must cover the starter opening -2- -arrow-.

Fig 2: Identifying Bolt & Spacer Sleeve

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

There is a risk of damaging the starter through improper handling.

- Tighten the bolt only with the spacer sleeve installed between the starter and the transmission.

-- Connect the battery. Required actions. Refer to BATTERY, DISCONNECTING AND CONNECTING .