Starter Generator - C29-, REMOVING AND INSTALLING, VEHICLES WITH 2.0L TFSI ENGINE (0K4): Removing
-- Disconnect the ground cable from the battery when the ignition is switched off. Refer to Battery -A-, DISCONNECTING AND CONNECTING, 0K4 AND VH0 .
-- Release the tension on the ribbed belt and remove it from the starter generator-belt pulley. Refer to the appropriate service information .
-- Disconnect the connector -3-.
-- Remove the nut -2- and free up the B+ wire -1-.
-- Remove the bolts -arrows-.
-- Remove the starter generator -1- upward.

