Fuel Tank, Removing, TDI Vehicles
Special tools and workshop equipment required
- Engine and Gearbox Jack :VAS6931
- Gearbox Support :T40173
Removing
-- Follow all safety precautions. Refer to SAFETY PRECAUTIONS .
-- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Switch off the ignition.
Risk of accident due to the weight of the fuel tank.
- The fuel tank must be empty when removing it.
-- Drain the fuel tank. Refer to FUEL TANK, DRAINING .
-- Remove the bench seat / single seat. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .
-- Remove the bolts -arrows- and remove the sealing flange cover -1-.
-- Disconnect the connectors -1 and 3- on the sealing flange by unlocking the connector safety catch.
-- Country/Rest of World equipment versions: release the connector safety catch and disconnect the connector -2-.
-- Remove the right rear wheel housing liner. Refer to REAR WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Remove the fuel filler door unit. Refer to FUEL FILLER DOOR UNIT, REMOVING AND INSTALLING .
A4:
-- Remove the bolts -1- and remove the reducing agent tank filler neck -3- from the fuel filler neck. Refer to the appropriate service information. .
-- Remove the fuel filler neck bolts -2-.
A5:
-- Remove the fuel filler neck bolts -A arrows-.
-- Remove the bolts -B arrows- and remove the reducing agent tank filler neck -1- from the fuel filler neck. Refer to the appropriate service information. .
Continuation for All Vehicles:
Seal the fuel filler neck opening with a clean plug to prevent any dirt from getting in.
-- Disengage the fuel filler neck from the mount.
-- Remove the rear underbody trim panels. Refer to OVERVIEW - UNDERBODY TRIM PANELS .
-- Remove the rear section of the exhaust system. Refer to MUFFLER, REMOVING AND INSTALLING .
-- Rest of World market-specific version/equipment version: loosen the lock washer -2- and remove the fuel hose -3- from the metering pump -1-.
The fuel system is under pressure.
Risk of injury from fuel spraying out.
- Wear protective eyewear.
- Wear safety gloves.
- Reduce the pressure: Place clean cloths around the connection point and carefully open the connection point.
-- Disconnect fuel lines -1 and 2-. Disconnect the connector couplings. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
FWD Vehicles:
-- Attach the Gearbox Support :T40173 to the Engine and Gearbox Jack :VAS6931 and position it to support the fuel tank, as shown.
Risk of accident due to the weight of the fuel tank.
- The fuel tank must be empty when removing it.
-- Remove the bolts -1 to 5-.
For clarity, the fuel tank is shown without the engine and gearbox jack.
-- Lower the fuel tank using the Engine and Gearbox Jack :VAS6931 .
When guiding out the fuel tank, pay attention to the clearance to the fuel filler neck.
AWD Vehicles:
-- Equipped on some models: remove the diagonal brace. Refer to DIAGONAL BRACES, REMOVING AND INSTALLING .
-- Remove the driveshaft. Refer to the appropriate service information. .
-- Attach the Gearbox Support :T40173 to the Engine and Gearbox Jack :VAS6931 and position it to support the fuel tank, as shown.
Risk of accident due to the weight of the fuel tank.
- The fuel tank must be empty when removing it.
-- Remove the bolts -1 through 7-.
For clarity, the fuel tank is shown without the engine and gearbox jack.
-- Lower the fuel tank using the Engine and Gearbox Jack :VAS6931 .
When guiding out the fuel tank, pay attention to the clearance to the fuel filler neck.









